Lamborghini Huracan Tecnica no drill front license support.

Manufactured by us in England ,

Huracan Tecnica front license plate support , which is no drill and with the

added benefit of being quick release (2022 to present ) ,

This fantastic uniquely designed no drill front license plate support is the perfect solution to fitting a front licence plate to

low central position of the front of the car and is also able to be removed in

seconds.

This license plate support comes in 2 sections , the sprung front license plate support and a

retaining hook mount that has to be bolted to the underside of the car ( NO HOLES ARE

ARE REQUIRED TO BE DRILLED AS THE HOOK PLATE PICKS UP AND USES THE EXISTING

FACTORY FITTED BOLT POSITIONS.) THE FITTING OF THE HOOK PLATE ONLY REQUIRES

15 MINUTES LABOUR TO UNBOLT THE EXISTING BOLTS AND HOLD UP THE MOUNTING

HOOK PLATE AND BOLD IT INTO POSITION.

THE BOLTING OF THE HOOK PLATE IS A 1 OFF OPERATION AND IS LEFT PERMANENTLY ON

UNDERSIDE OF THE CAR , THE FRONT SECTION OF THE LICENSE SUPPORT CLAMPS ONTO THE LOWER FRONT BUMPER AND THE UNDER HOOK PLATE .

• No drilling of your bumper required.

• Fit and remove the bracket/licence plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• UK standard plate size 520mm+111mm to 200mm+75mm Licence plates fit easily onto the support.
• All size License Plate fit this no drill license support.
• License plate support can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the holder.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts/lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting support and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• License plate support / clamp comes completely assembled.
• 3M Double sided license plate tape is also included with the license support .
• Collection from our Wickford Factory.
• What's in the box the box.

• Pre-assembled license plate support.
• Under side hook plate.
• 3M Double sided foam tape for fitting of your License plate to the support.
• Worldwide shipping .