Lamborghini Huracan Tecnica no drill front license mount,

This Huracan Tecnica front licence plate mount is manufactured in England. It is a no-drill solution with a quick-release mechanism (available from 2022 onwards).

This mount is ideal for fitting a front licence plate to a low central position on the front of the car and can be removed in seconds.

The mount consists of two sections: a sprung front licence plate mount and a retaining hook mount that is bolted to the underside of the car. No holes are required to be drilled as the hook plate picks up and uses the existing factory bolt positions. The fitting of the hook plate requires 15 minutes of labour to unbolt the existing bolts, hold the mounting hook plate in position and bolt it into place.

The mounting plate is a one-off operation and is permanently fixed to the underside of the car. The front section of the licence plate mount hooks onto the lower front bumper section and is retained in place by the sprung loaded mechanism. 

• No drilling of your bumper required.
• No modifications to the car to fit our uniquely designed License mount.

• Fit and remove the bracket/licence plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• UK standard plate size 520mm+111mm to 200mm+75mm number plates fit easily onto the mount plate.
• All size License Plate fit this no drill license holder.
• License plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts/lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting support and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• License plate mount / clamp comes completely assembled.
• 3M Double sided license plate tape is also included with the mount .
• Collection from or Wickford factory.

• What's in the box 

• Pre-assembled license plate mount.
• Under side hook plate.
• 3M Double sided foam tape for fitting of your License plate to the mount.
• Worldwide shipping .