Lamborghini Huracan Evo RWD

Rear wheel drive front licence plate bracket

This bracket is a quick-release solution for fitting a front number plate to the low central position of the front of the car. It is available from 2020 to the present.

The bracket is made of two sections: a sprung front number plate mount and a retaining hook mount that is bolted to the underside of the car. No holes are required to be drilled as the mount plate picks up and uses the existing factory bolt positions. The fitting of the mount plate requires 15 minutes of labour to unbolt the existing bolts, hold up the mounting hook plate and bolt it into position.

The mounting plate is a one-off operation and is permanently fixed to the underside of the car. The underside of the number plate mount hooks onto it and retains itself by clamping onto the lower front bumper skirt..

• No drilling of your bumper required.

• Fit and remove the bracket/number plate in seconds.
• Fantastic for car shows or track day events when you need to remove your number plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• Number plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• UK standard plate size 520mm+111mm to 200mm+75mm number plates fit easily onto the mount plate.
• Number plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts/lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting bracket and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• Number plate clamp/bracket comes completely assembled.
• Double sided number plate tape is also included with the mount .

• What's in the box

• Pre-assembled license plate mount.
• Under side hook plate.
• Double sided foam tape for fitting of your number plate to the mount.
• Worldwide shipping .