This front license fastener fits,

Lamborghini Aventador Ultimae , LP780-4 ( 2021 to present. )

We also manufacture front license plate fastener for Lamborghini Huracan Evo front license fastener , Lamborghini Huracan Performante LP640 front license plate fastener , Lamborghini Huracan LP580-2 front license plate fastener , Lamborghini Huracan LP610-4 front license fastener , Lamborghini Aventador LP700 front license fastener , Lamborghini Aventador SV front license plate fastener , Lamborghini Aventador SVJ front license plate fastener , Lamborghini Huracan evo RWD front license plate fastener , Lamborghini Huracan STO front license plate fastener ,

Please click on the shop button to view all of our other Lamborghini , Mclaren & Ferrari no drill front license mount.

This fantastic front license plate fastener is the perfect solution to fitting a front license plate to a Lamborghini Aventador LP780 Ultimae,

fitted in a low central position of the front of the car and can be fitted and removed in seconds.

This License plate fastener comes in 2 sections , the sprung front license plate fastener and a

retaining hook mount that has to be bolted to the underside of the car ( NO HOLES ARE

ARE REQUIRED TO BE DRILLED AS THE FASTENER PLATE PICKS UP AND USES THE EXISTING

FACTORY FITTED BOLT POSITIONS.) THE FITTING OF THE FASTENER PLATE ONLY REQUIRES

15 MINUTES LABOUR TO UNBOLT THE EXISTING BOLTS AND HOLD UP THE MOUNTING

HOOK PLATE AND BOLT IT INTO POSITION.

THE BOLTING OF THE FASTENER PLATE IS A 1 OFF OPERATION AND IS LEFT PERMANENTLY ON

UNDERSIDE OF THE CAR,THE UNDER SECTION OF THE LICENSE PLATE FASTENER HOOKS ONTO

IT AND THEN RETAINS ITSELF ON THE BY CLAMPING ITSELF ONTO THE LOWER FRONT BUMPER

SKIRT.

• No drilling of your bumper required.

• Fit and remove the fastener / license plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate fastener face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• Any size license plate fits onto our fastner via double sided tape or the bolting on of a license frame onto the pre drilled holes on the front face of our mount.
• UK standard plate size 520mm+111mm to 200mm+75mm license plates fit easily onto the mount plate.
• License plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts / lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting fastener and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• License plate fastener / comes completely assembled.
• Double sided license plate tape is also included with the fastener .

• What's in the box .

• Pre-assembled license plate fastener.
• Under side hook plate.
• Double sided foam tape for fitting of your License plate to the fastener.
• Worldwide shipping.