This uniquely designed two-part license plate mount is sprung-loaded and fits onto the lower bumper section of the car. No drilling or modifications are required for installation.

The mount is ideal for fitting a front licence plate in a low central position and can be removed quickly. It is available in two sections: the sprung front number plate mount and a retaining hook mount that is bolted to the underside of the car. The mounting plate picks up and uses the existing factory bolt positions. The fitting of the mounting plate requires 15 minutes of labour to unbolt the existing bolts, hold up the mounting hook plate and bolt it into position. The bolt is a one-off operation and is permanently fixed to the underside of the car. The lower section of the number plate mount hooks onto the underside and retains itself by clamping onto the lower front bumper skirt..

• No drilling of your bumper required.

• Fit and remove the bracket/license plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• UK standard plate size 520mm+111 mm to 200mm+75mm number plates fit easily onto the mount plate.
• License plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts/lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting bracket and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• License plate clamp/bracket comes completely assembled.
• Double sided number plate tape is also included with the mount .

• What's in the box .

• Pre-assembled license plate mount.
• Under side hook plate.
• Double sided foam tape for fitting of your license plate to the mount.
• Worldwide shipping .