No drill front license plate mount for a Lamborghini Huracan Evo RWD Spyder and Coupe . Mounts license plate in the centre of the bumper with no holes , tapes , or modifications . Lamborghini Huracan EVO RWD no drill front license mount. Great for car shows or track sessions when you want to quickly remove your front plate , Soft-closed cell foam on all contact surfaces protects paint , Lamborghini Huracan Evo rwd no drill license bracket , Number plate .

This uniquely designed 2 part license plate mount is sprung loaded & fits onto the lower bumper section of the car , no drilling or any modifications are required to fit this license mount to your car .Lamborghini Huracan Evo RWD

Huracan Evo rear wheel drive front license plate bracket, which is no drill and with the

added benefit of being quick release (2020 to present ) ,

This fantastic number plate mount is the perfect solution to fitting a front license plate to

low central position of the front of the car and is also able to be removed in

seconds.

This license plate mount comes in 2 sections , the sprung front license plate mount and a

retaining hook mount that has to be bolted to the underside of the car ( NO HOLES ARE

ARE REQUIRED TO BE DRILLED AS THE MOUNT PLATE PICKS UP AND USES THE EXISTING

FACTORY FITTED BOLT POSITIONS.) THE FITTING OF THE MOUNT PLATE ONLY REQUIRES

15 MINUTES LABOUR TO UNBOLT THE EXISTING BOLTS AND HOLD UP THE MOUNTING

HOOK PLATE AND BOLD IT INTO POSITION.

THE BOLTING OF THE MOUNTING PLATE IS A 1 OFF OPERATION AND IS LEFT PERMANENTLY ON

UNDERSIDE OF THE CAR , THE UNDER SECTION OF THE NUMBER PLATE MOUNT HOOKS ONTO

IT AND THEN RETAINS ITSELF ON THE BY CLAMPING ITSELF ONTO THE LOWER FRONT BUMPER

SKIRT.

• No drilling of your bumper required.

• Fit and remove the bracket / license plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• UK standard plate size 520mm+111mm to 200mm+75mm license plates fit easily onto the mount plate.
• License plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts / lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting bracket and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• Number plate clamp/bracket comes completely assembled.
• Double sided number plate tape is also included with the mount .

• What's in the box the box.

• Pre-assembled license plate mount.
• Under side hook plate.
• Double sided foam tape for fitting of your number plate to the mount.
• Worldwide shipping .