This front no drilling license bracket fits,

Lamborghini Aventador Ultimae , LP780-4 ( 2021 to present. )

This fantastic front license plate bracket is the perfect solution to fitting a front license plate to a Lamborghini Aventador LP780 Ultimae, No drilling required and it has the added benefit of being Quick Release .

fitted in a low central position of the front of the car and can be fitted and removed in seconds.

This License plate mount comes in 2 sections , the sprung front license plate bracket and a

retaining hook mount that has to be bolted to the underside of the car ( NO HOLES ARE

ARE REQUIRED TO BE DRILLED AS THE MOUNT PLATE PICKS UP AND USES THE EXISTING

FACTORY FITTED BOLT POSITIONS.) THE FITTING OF THE MOUNT PLATE ONLY REQUIRES

15 MINUTES LABOUR TO UNBOLT THE EXISTING BOLTS AND HOLD UP THE MOUNTING

HOOK PLATE AND BOLT IT INTO POSITION.

THE BOLTING OF THE MOUNTING PLATE IS A 1 OFF OPERATION AND IS LEFT PERMANENTLY ON

UNDERSIDE OF THE CAR,THE UNDER SECTION OF THE LICENSE PLATE BRACKET HOOKS ONTO

IT AND THEN RETAINS ITSELF ON THE BY CLAMPING ITSELF ONTO THE LOWER FRONT BUMPER

SKIRT.

• No drilling of your bumper required.

• Fit and remove the bracket / license plate in seconds.
• Fantastic for car shows or track day events when you need to remove your license plate.
• Ultra soft 5mm thick exoanded neoprene sponge strips fitted to surfaces that touch your bumper.
• License plate support face 200mm+75mm manufactured from 1.6mm zintec sheet steel .
• Any size license plate fits onto our mount via double sided tape or the bolting on of a license frame onto the pre drilled holes on the front face of our mount.
• UK standard plate size 520mm+111mm to 200mm+75mm number plates fit easily onto the mount plate.
• License plate mounting can also be manufactured to a smaller size if required.
• Black 80% gloss powder coating to all sheet steel elements of the bracket.
• All sheet steel elements manufactured with 1.6 mm thick zintec.
• 1.5mm A class helical compression springs ,manufactured with carbon spring steel & bright zink plated BSEN1SO9001 rated.
• Spring loaded clamping mechanisms hidden on the underside of the bumper.
• All bolts / lock nuts including the sliding mechanism manufactured with 304 grade stainless steel.
• Mounting bracket and clamping mechanism will not decrease the ground clearance of the car.
• Does not interfere with parking sensors.
• Does not interfere with front parking camera.
• License plate bracket comes completely assembled.
• Double sided number plate tape is also included with the bracket .

• What's in the box .

• Pre-assembled license plate bracket.
• Under side hook plate.
• Double sided foam tape for fitting of your License plate to the bracket.
• Worldwide shipping.